Seal-it® 732 TIXBOND-PU D4 is a professional, fast-curing, paintable, polyurethane adhesive with a pasty structure. Suitable for indoor and outdoor applications, bonding all wooden joints and bonding wood to metal, stone, concrete, plastic and insulation material.
SEAL-IT® 732 Tixbond-PU D4
- Vullende, overschilderbare PU-lijm
- Specifiek voor allerlei houtverbindingen
- Geschikt voor binnen- en buitentoepassingen
Seal-it® 732 TIXBOND-PU D4 is a professional, fast-curing, paintable, polyurethane adhesive with a pasty structure. Suitable for indoor and outdoor applications, bonding all wooden joints and bonding wood to metal, stone, concrete, plastic and insulation material.

Applications
- For bonding all wood joints such as window frames, baseboards, sheet metal and floorboards.
- Surface gluing, dowels, wood joints, mortise and tenon joints and dovetails.
- For bonding wood to metal, stone, concrete, plastic and insulation material. (PU foam/PS foam), rock wool and glass wool.
- Also suitable for almost all substrates used in construction and industry.
- Suitable for interior and exterior applications such as joinery. Ship and interior paneling.

Properties
- Very fast curing.
- Limited filling, slightly effervesces.
- Low odour.
- Good standing, does not drip.
- Water resistant (D4).
- Suitable for exterior finger welding.
- Permanently weather, water and moisture resistant.
- Paintable and sandable.
- NEN-EN 204 D4.
- Solvent-free.
- Thixotropic.

Application conditions
- On tolerable, load-bearing, clean and grease-free substrates.
- Remove loose substrates using a suitable brush.
- Thoroughly degrease substrates using Seal-it® 510 CLEANER.
- Apply at temperatures between +5°C to +40°C (for environments and substrates).
- Always test substrates in advance for adhesion.
- Wood moisture content must be between 10% and 18% (max. 25%).
- For proper adhesion one of the two substrates must be porous.
- Apply adhesive to one of the two substrates.
- Place the substrates to be bonded together within the specified time and avoid shifting.
- Apply from the tube in beads, stripes or dots, if necessary spread with a 1 mm notched trowel.
- Open time: approx. 5-10 min.
- Bonding time: 20-30 min.
- Join the joints well together to obtain a correct connection.
Assortment
Colour | 12 x 310ml cartridge |
Transparent cream | SI-732-0000-310 |
Pallet unit:
Cartridge – 1248 pieces
SI-XXX-XXXX-XXX = Item number.