Seal-it® 550 FINISH

  • Universal tool for finishing sealant joints
  • PH neutral, biodegradable and solvent free
  • Virtually odorless and leaves no streaks or stains

Seal-it® 550 FINISH is a PH-neutral, biodegradable, solvent- and silicone-free tool, for finishing sealant joints quickly, easily and neatly. Available as a ready-to-use mixed version in handy 1L spray bottle and as a 5L concentrate, which must be diluted with water.

Seal-it® 550 FINISH is a PH-neutral, biodegradable, solvent- and silicone-free tool, for finishing sealant joints quickly, easily and neatly. Available as a ready-to-use mixed version in handy 1L spray bottle and as a 5L concentrate, which must be diluted with water.

Seal-it_550_02

Applications

  • As a smoothing agent for easy, clean, quick and smooth finishing of joint seals. (wet tooling)
  • Only use before skin formation on material to be finished.
  • Suitable for all sealant types and technologies.

Properties

  • PH-neutral, biodegradable, solvent-free.
  • Simplifies achieving a smooth and tight finish on joint seals.
  • Highly dilutable in water, for cost-effective use.
  • Does not leave streaks or stains with proper mixing ratios.
  • Practically odourless and not aggressive on surfaces.
  • UN-approved packaging, fitted with a safety seal.
  • Silicon-free, so sealant surface tension will not change and affect painting results, unless too much is applied.
  • Available in a handy spray bottle (small packaging), ready-mixed version.

Application conditions

  • Application temperature (ambient and surface) between +5°C and +40°C.
  • Mixing ratio: from 1 to a maximum of 3 parts Seal-it® 550 FINISH to 100 parts water.
  • After adding the 2 parts together (Seal-it® FINISH/water), stir well until a homogeneous mass forms.
  • After applying the sealant, pre-moisten the joint surface and adjacent materials evenly with diluted Seal-it® 550 FINISH, taking care not to use too much. The joint can now been finished smooth and tight with a finishing block, putty knife or PVC spout. If necessary, finish the joint using diluted Seal-it® 550 FINISH.
  • Use water to remove any excess Seal-it® 550 FINISH.

Assortment

Colour 1L spray bottle 5 L jerrycan
SI-550-000-1000 SI-550-000-5000

Packing unit:
12x 1L
2x 5L

Pallet unit:
Spray bottle – 480 pieces
Jerry can – 144 pieces

SI-XXX-XXXX-XXX = Item number.