Seal-it® 472 PU-FIRE FOAM is a durable flame and fire retardant insulation and assembly foam. Specially developed for flame- and fire-retardant joint sealing between various building components, up to a max. joint width of 40mm.
Seal-it® 472 PU-FIRE FOAM
- Flame and fire retardant insulation and mounting foam
- Developed for flame and fire-retardant joint sealing, between various construction parts, up to a max. joint width of 40mm
- High filling capacity, fast curing
Seal-it® 472 PU-FIRE FOAM is a durable flame and fire retardant insulation and assembly foam. Specially developed for flame- and fire-retardant joint sealing between various building components, up to a max. joint width of 40mm.

Applications
- Particularly suitable for flame and fire-retardant sealing, insulation and filling of connecting joints, seams, cracks and holes in interior and exterior façades, cavity walls, partitions and ceiling, roof and floor components.
- Seal, insulate and fill pipe and line penetrations through ceilings, roofs, floors and interior and exterior walls.
- Seal, insulate and fill adjustment and installation spaces around prefab components, sections and door and window frames.
- Adhere, install, insulate and seal between different insulation panels/boards and panel materials in the construction of roofs, façades, floors and interior and exterior walls.
- Seal, insulate and fill connections in ridges, dormers, chimneys, air exhaust ducts and bay windows.
- Fill, seal and insulate hollow spaces/holes in roofs, floors, façades, ceilings and interior and exterior walls.

Properties
- Flame and fire-retardant quality, tested according to EN 1366-3 & EN 1366-4 B1.
- Adheres excellently to many materials, such as stone, concrete, stucco, masonry, gypsum, wood, metal and various plastics, such as Styropor, hard PU foam, polyester and hard PVC.
- Excellent acoustic and insulating properties.
- Very low emission: certified VOC emission class A+.
- High output, approx. 45 litres at free expansion.
- Fast-curing, fine-celled and easy-to-cut polyurethane foam.
- Foams during the curing process, high filling capacity.
- Lasting resistance to weather, water, moisture and ageing; does not rot.
- Simple, easy and clean application with the Seal-it® PU gun.
- Excellent resistance to hot and cold temperatures, water and many chemicals.

Application conditions
- Application temperature (ambient and surface) between +5°C and +40°C.
- On compatible, stable, clean, uncontaminated and grease-free surfaces.
- Use a suitable brush to remove any loose particles from the surface.
- Degrease the surface properly using Seal-it® 510 CLEANER.
- Give the canister approx. 20 good shakes before use.
- If necessary, use a plant sprayer to lightly moisten the surface in advance.
- Cut off fully cured excess Seal-it® 472 PU-FIRE FOAM with a knife and/or trowel.
- Before use, grease the threading of the gun adapter with Vaseline, PTFE and/or silicone spray, to prevent the canister sticking to the PU gun.
- After securing the canister in the gun, the spray speed and output volume are adjustable using the setscrew on the back of the gun for efficient/economic use.
- When not in use, tighten the setscrew on the back of the PU gun until it is closed so the PU gun can no longer be activated.
- Always leave the canister in the PU gun until it is completely empty.
- Remove the empty canister by holding in the trigger while unscrewing it in order to expel any remaining propellent gas.
- Next, reload the PU gun with a full canister and/or clean the PU gun thoroughly using Seal-it® 450 PUR CLEANER.
- If the PU gun is not working properly, put Seal-it® 450 PUR CLEANER on the PU gun. Spray through several times and let set well for approx. 15 min. Spray through again and then remove the Seal-it® 450 PUR CLEANER canister.
Assortment
Colour | 12 x 750ml Cartridge |
Red | SI-472-0000-750 |
Pallet unit:
Cartridge – 672 pieces
SI-XXX-XXXX-XXX = Item number.
Certification
- EN 1366-3 / EN 1366-4 B1
- VOC-emission class A+