Seal-it® 352 SUPER-PRO

  • High quality, plasticizer-free, all-round adhesive sealant for indoor and outdoor applications
  • For stain-free sealing and bonding of natural stone, mirrors and porous materials
  • Sandable and grindable after complete curing, can be painted over immediately after skin formation

SEAL-IT® 352 SUPER-PRO is a high-quality, plasticiser-free, all-round adhesive sealant based on MS-Polymer®. Specifically developed for stain-free sealing and bonding of natural stone, mirrors and porous materials.

SEAL-IT® 352 SUPER-PRO is a high-quality, plasticiser-free, all-round adhesive sealant based on MS-Polymer®. Specifically developed for stain-free sealing and bonding of natural stone, mirrors and porous materials.

Seal-it_352

Applications

  • Universal joint sealant and material adhesive in the construction, industrial, marine and automotive sectors.
  • Versatile sealant for connections between building components in floor, roof, façade and interior and exterior wall structures.
  • Multifunctional installation and construction adhesive, suitable for almost all building materials.
  • Fungicidal joint sealant in sanitary spaces and other spaces with plumbing fixtures, as well as cold storage units.
  • Seal, adhere and install natural stone, marble, granite, hard stone, concrete and other porous stone types and/or materials, such as untreated wood types.
  • Highly UV-resistant glazing compound for top and bead seals for glass panes.
  • Structural bonding in vibrating structures.
  • Seal, adhere and install metal parts in the construction of roofs, façades, bodywork, containers and air ducts.
  • Adhesion of post-and-lintel slabs and EPDM films in the construction of roofs, façades and ponds.
  • Excellently suited for adhesion and installation of mirrors and façade and decorative panels.
  • Perfect for use as a paintable sealant and filler for joints, seams, cracks, holes and fissures.
  • Repair adhesive or sealant for renovation, maintenance, assembly, installation and repair work in the construction and transport sectors.

Properties

  • Durable, retains elasticity, maximum movement capacity of 25%.
  • Excellent adhesion without primer on practically all surfaces, even moist ones.
  • Seal, adhere and install practically anything with a single product, both indoors and out.
  • Superb working properties, professional A quality.
  • High mechanical resistance and ultimate strength, fast-strengthening and fast-curing.
  • Good resistance to discolouration, UV, weather, water, moisture, fungus and ageing.
  • Odourless, bubble-free and non-shrink fast-curing CE-certified MS-Polymer® system.
  • Free of plasticisers, phthalates, isocyanate, solvents and silicone.
  • Very low emission: certified EMICODE EC1 PLUS and VOC emission class A+.
  • Compatible in direct contact with the silver coating on mirrors and PVB-laminated glass.
  • No edge contamination, staining or bleeding on porous materials, such as concrete, natural stone and untreated wood.
  • Sandable and grindable once fully cured; paintable immediately after skin formation.
  • Non-corrosive to metals.
  • Absorbs acoustic and mechanical vibrations well.
  • Usable wet-on-wet, repair with the same material.

Application conditions

  • Application temperature (ambient and surface) between +5°C and +40°C.
  • On clean, uncontaminated, compatible, stable, grease-free and dust-free surfaces.
  • Ensure proper joint dimensions, for proper absorption of any movements.
  • Use a suitable brush to remove any loose particles from the surface.
  • Degrease the surface properly using Seal-it® 510 CLEANER.
  • Seal-it® 352 SUPER-PRO has a broad bonding spectrum, but highly porous surfaces should be pre-treated with Seal-it® 520 PRIMER and non-porous surfaces with minimal bonding should be treated with Seal-it® 525 Clean & Bond.
  • For adhesive applications, apply material vertically (ventilation) in beads spaces between a minimum of 10 cm and a maximum of 20cm. Do not apply in dabs! It is recommended to use double-sided adhesive SEAL-IT® 560 PANELTAPE to support adhesion during the curing process and to achieve the correct adhesive thickness.
  • Use Seal-it® 550 FINISH to apply a smooth and tight finish, before skin formation.

Assortment

Colour 12 x 290ml cartridge
Grey SI-352-7100-290
White SI-352-9100-290
Black SI-352-9200-290

Pallet unit:
Cartridge – 1,248 pieces

SI-XXX-XXXX-XXX = Item number.

Certification

  • EN 15651-1: F-INT
  • VOC-emission class A+
  • EMICODE EC1 PLUS
  • BREEAM
  • ISEGA FOOD APPROVAL