Seal-it® 340 CRYSTAL

  • Crystal clear, professional adhesive and sealant
  • Suitable for crystal clear sealing, bonding and mounting on practically all surfaces/materials
  • Quickly tack-free, can be applied wet-on-wet

Seal-it® 340 CRYSTAL is a crystal clear, high-quality and professional adhesive and sealant, based on MS-Polymer®. Specially developed for light bonding of various building materials and sealing connecting joints.

Seal-it® 340 CRYSTAL is a crystal clear, high-quality and professional adhesive and sealant, based on MS-Polymer®. Specially developed for light bonding of various building materials and sealing connecting joints.

Seal-it_340

Applications

  • Crystal-clear sealing, adhesion and installation on practically any surface/material.
  • Seal connecting joints on many building components, especially transparent ones, such as glass, polycarbonate and acrylic.
  • Light adhesion and installation of many building components, especially transparent ones, such as glass, polycarbonate and acrylic.

Properties

  • Crystal-clear, blends seamlessly with translucent/transparent components.
  • Durable, retains elasticity, maximum movement capacity of 25%.
  • Versatile and user-friendly: glue, install and seal almost anything, both indoors and out.
  • Excellent adhesion without primer on many surfaces, even moist ones.
  • Paintable with water-based and synthetic paint systems.
  • Usable wet-on-wet, repair with the same material, short tack-free time after skin formation.
  • Free of isocyanate, solvents and silicone.
  • Very low emission: certified EMICODE EC1 PLUS.
  • Good resistance to weather, water, moisture and ageing.
  • Non-corrosive to metals.
  • Odourless, bubble-free and non-shrink fast-curing MS-Polymer® system.

Application conditions

  • Application temperature (ambient and surface) between +5°C and +40°C.
  • On stable, compatible, clean, uncontaminated, grease-free and dust-free surfaces.
  • Use a suitable brush to remove any loose particles from the surface.
  • Degrease the surface properly using Seal-it® 510 CLEANER.
  • Seal-it® 340 CRYSTAL has a broad bonding spectrum, but highly porous surfaces should be pre-treated with Seal-it® 520 PRIMER and non-porous surfaces with minimal bonding should be treated with Seal-it® 525 Clean & Bond.
  • For adhesive applications, apply material vertically (ventilated) in beads spaced between a minimum of 10 cm and a maximum of 20 cm apart. Do not apply in dabs! It is recommended to use double-sided adhesive SEAL-IT® 560 PANELTAPE to support adhesion during the curing process and to achieve the correct adhesive thickness.
  • Use Seal-it® 550 FINISH to apply a smooth and tight finish, before skin formation.

Assortment

Colour 12 x 290ml cartridge
Transparant SI-340-0000-290

Pallet unit:
Cartridge – 1,248 pieces

SI-XXX-XXXX-XXX = Item number.

Certification

  • EN 15651-1: F-INT
  • EUROFINS LEED®
  • BREEAM
  • VOC-emission class A+
  • EMICODE EC1 PLUS
  • ISEGA