Applications

  • Specially designed for adhesion and/or sealing of EPDM films in roof, façade, floor and pond structures.
  • Adhesion of building materials, such as plastics, stony surfaces, metals, alloys, treated and untreated wood, concrete and coating, lacquer and paint systems.

Properties

  • Adheres perfectly to EPDM and most surfaces, even moist ones, without primer.
  • Durable, retains elasticity, with high movement capacity.
  • Wet-on-wet application.
  • Non-shrink and bubble-free.
  • Practically odourless curing MS-Polymer® system.
  • Good resistance to UV, weather, water, moisture and ageing.
  • Non-corrosive to metals.
  • Free of isocyanate, solvents and silicone.
  • Paintable with water-based and synthetic paint systems.
  • Excellent absorption of acoustic and mechanical vibrations.

Application conditions

  • Application temperature (ambient and surface) between +5°C and +40°C.
  • On stable, compatible, dry, uncontaminated, grease-free and dust-free surfaces.
  • Use a suitable brush to remove any loose particles from the surface.
  • Properly degrease greasy surfaces using Seal-it® 510 CLEANER.
  • Seal-it® 310 MS-EPDM has a broad bonding spectrum, but highly porous surfaces should be pre-treated with Seal-it® 520 PRIMER and non-porous surfaces with minimal bonding should be treated with Seal-it® 525 Clean & Bond.
  • Use Seal-it® 550 FINISH to apply a smooth and tight finish, before skin formation.

Assortment

No standard stock.

No default stock.
Available in black in blank packaging.
Also available in Seal-it packaging on request.

Pallet unit:
Cartridge blank – 1,560 pieces
Cartridge Seal-it – 1,248 pieces
600ml foil pack – 792 pieces

 

 

SI-XXX-XXXX-XXX = Item number.